|
Our new page details the trailers we
build for all our boats. These are specifically designed and built for each
boat from top quality British steel. We are the ONLY manufacturer to build
these trailers specifically designed for these hulls. They are available for
both the Devon and
Drascombe™
range of boats. So treat your boat to a new trailer next season- this is an
often neglected piece of equipment which can make or break a holiday trip if
neglected! All our trailers have VIN plates, are CE Certified and all the
Swinging Cradle trailers have waterproof bearing axles, unique to a Honnor
Marine Trailer. All prices quoted on this page are in UK pounds (Stirling) and INCLUDES VAT at the current rate of 17.5%. Click on photos for larger pictures! All Photographs Copyright © 2008 Honnor Marine (UK) Ltd These cannot be used elsewhere without the express written permission from Honnor Marine (UK) Ltd |
Scaffie Dabber Lugger Longboat/Coaster/Cruiser Gig Cape Cutter 19
|
Our Scaffie Trailer is a T Frame design and is non braked This picture shows the rear of the trailer. Note the rollers supporting the keel and the rollers supporting the hull beneath the bilge keels. This makes easy launch and recovery. Costs Basic Trailer: £850.00 Lighting Board Option, Including Lighting Set: £65.21 2 Securing Straps: £29.96 Spare Trailer Wheel: £52.88 Spare Trailer Wheel Fitted On Bracket: £76.38 |
 |
| This view shows the lighting board holder in place which is removable. This is an option (se above) |
 |
| This view shows an elevation of the lighting board holder |
 |
|
One of our new Scaffie's on its trailer
going to another delighted Honnor Marine Customer!Note the lighting board!
This picture also shows the jockey wheel, winch and bow locating rubber
fitting. Also visible is the hand pull bar on the front of the trailer to
aid launching and recovery. Note we also supply a full range of boat covers for the Scaffie in top quality acrylic canvas for maximum durability. |
 |
Dabber (click here to return to the top of this page)
|
With our Dabber we offer two different trailer designs:
This picture shows the layout of the T frame trailer, including the rollers supporting the hull and the bow locating rubber, along with the jockey wheel and winch. Also visible is the hand pull bar on the front of the trailer to aid launching and recovery. We also offer the following options for these trailers: Lighting Board Option, Including Lighting Set And 2 Straps: £70.50 Spare Trailer Wheel: £52.88 Spare Trailer Wheel Fitted On Bracket: £76.38 |
 |
| The Swinging Cradle trailer has rollers which align the bow to the central support rollers and aid launching and recovery. The rollers also support the hull on the trailer. The rollers and swinging cradle arrangement can be clearly seen in the longboat/Cruiser/Coaster section below. The cradle itself moves along with the rollers. |
 |
| This photograph shows the Dabber trailer with the spare wheel and bracket attached |
 |
| Note we also supply a full range of boat covers for the Dabber in top quality acrylic canvas for maximum durability |
 |
| The "Three Graces" at the Beale Park boat show. The Dabber is to the far right. . |
 |
Lugger (click here to return to the top of this page)
|
With our Lugger being one of the most popular boats in the range we offer 3 different trailers:
All these trailers include a hand pull bar on the front of the trailer to aid launching and recovery along with a winch and jockey wheel. We also offer the following options for these trailers: Lighting set, including number plate and 3 off 5 tonne securing strap £70.50 Spare Wheel On Bracket £110.00 Spare Wheel: £75.00 Easy Launch Winch £95.00. Note this is separate to the winch shown on the trailer and is designed as a winch to hook over the ball of the car to separately winch the trailer up a very steep slipway when the trailer is detached from the car. |
 |
| The picture above and left shows Georgia P on one of our braked swinging cradle trailers with one of our acrylic canvas sprayhood's shown during fitting. The Swinging Cradle trailer has rollers which align the bow to the central support rollers and aid launching and recovery. The rollers also support the hull on the trailer. The rollers and swinging cradle arrangement can be clearly seen in the longboat/Cruiser/Coaster section below. The cradle itself moves along with the rollers. |
 |
| The picture left shows the arrangement of the Lugger on the cradle. Note the Lighting board which is detachable for launching. A very innovative design |
 |
| This picture shows another one of our luggers on one of our braked swinging cradle trailers for delivery. We also supply a range of covers for the lugger in acrylic canvas for maximum durability. |
 |
Longboat/Coaster/Cruiser (click here to return to the top of this page)
|
With our Longboat/Coaster/Cruiser we offer 2 different trailers:
All these trailers include a hand pull bar on the front of the trailer to aid launching and recovery along with a winch and jockey wheel. We also offer the following options for these trailers: Lighting set, including number plate and 3 off 5 tonne securing strap £70.50 Spare Wheel On Bracket £110.00 Spare Wheel: £75.00 Easy Launch Winch £95.00. Note this is separate to the winch shown on the trailer and is designed as a winch to hook over the ball of the car to separately winch the trailer up a very steep slipway when the trailer is detached from the car. |
 |
| The Swinging Cradle trailer has rollers which align the bow to the central support rollers and aid launching and recovery. The rollers also support the hull on the trailer. The rollers and swinging cradle arrangement can be clearly seen in the picture above and right. The cradle itself moves along with the rollers. |
 |
| The photo right shows the rollers supporting the hull |
 |
| One of our new Coasters preparing to be launched on one of our swinging cradle trailers |
 |
| Detail of the Coaster Swinging Cradle Trailer with the number plate and bracket removed. This arrangement is shown on our lugger trailer |
 |
| Ready to launch. Note this is on a very shallow slip way. All our Swinging Cradle trailers have waterproof bearings which are a unique feature of a Honnor Marine trailer. |
 |
Gig (click here to return to the top of this page)
|
We offer a Braked Back trailer for the
Gig at a cost of £2344.42. Photographs will follow We also offer the following options for these trailers: Lighting set, including number plate and 3 off 5 tonne securing strap £70.50
|
 |